Our industry is changing…
Never before has the integration between video and audio been so critical as it is now.
SynAudCon can help your team adapt to changes and be successful – no matter what comes next.
Course 100 - Principles of Audio
Take your team’s average up a notch by building on what they learned in “Course 50.” With Course 100 – your team will learn about the technical principles of audio; including advanced troubleshooting techniques, digital audio, analog interfaces, loudspeaker fundamentals, audio meters, and more!
Earn 16 RUs & 8 Cedia CEUs
Course 110 - Transformer-Distributed Loudspeaker Systems
This specialty course dives deep into the workings of decentralized loudspeaker systems. Your team will learn how transformers are used for signal distribution, including how they affect the applied voltage and current, and how they reflect the connected impedance.
Earn 9 RUs & 4.5 Cedia CEUs
Course 120 - Digital Signal Processing
Digital signal processors abound, but a DSP is only as good as the processes that it executes and the person that deploys it. An experienced audio practitioner is required to configure a DSP for a specific task. This course takes a deep dive into signal processing, including IIR Filters, FIR filters, and more!
Earn 12 RUs & 6 Cedia CEUs
Course 130 - Equalization
In a direct, systematic, and orderly approach, this course covers the core concepts of electroacoustic measurements and room acoustics and applies them to the equalization process. It will improve your proficiency on a simple 1/3-oct RTA or an advanced PC-based measurement system.
Earn 18 RUs & 9 Cedia CEUs
Course 200 - Signal Chain Optimization
Is your system optimized? Is it operating at its fullest potential? This course addresses the signal chain in-depth, including gain structure, component specifications, and amplifier/loudspeaker deployment. Learn principles and procedures that will allow you to reason your way through the system setup and calibration.
Earn 18 RUs & 7 Cedia CEUs
Course 210 - Advanced Equalization
If you are ready for a deeper understanding of the electroacoustic measurements used for system tuning this course is for you. Additional lectures on phase, group delay, wavelets, IIR and FIR filters are included.
This course is an excellent prep for training on specific measurement platforms.
Earn 22 RUs & 11 Cedia CEUs
Course 300 - Sound Reinforcement for Designers
Sound Reinforcement for Designers is built upon the idea that YOU, not a computer program, are the designer. We demonstrate how to use the software tools to extend your intuition and to try your ideas, without replacing the logical thought process. You can have confidence at the drawing board that your systems, once installed, will work.
Earn 20 RUs & 10 Cedia CEUs
Revit for AV Systems
Developed by Jerrold Stevens. This online course takes you step-by-step through the workflow for designing AV systems right in Revit. The workflow explained in this course can dramatically increase your productivity and improve document accuracy.
Earn 12 RUs & 4.5 Cedia CEUs
Check out our sponsors.
Manufacturers worldwide supports SynAudCon training.